Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in San Jose, CA
Furnace repair in San Jose typically costs between $150 and $650 for most common fixes, with the work usually completed the same day a technician arrives. The majority of repairs we handle at Cold Harbour Heating and Air fall into a few familiar categories: failed igniters, worn blower motors, faulty thermostats, and cracked heat exchangers. If your furnace is making noise, short-cycling, or blowing cold air, call (669) 800-4179 and we’ll send a technician who can diagnose the problem and hand you a written price before any work begins.
We’re an independently operated HVAC company serving San Jose and the surrounding South Bay neighborhoods. This page covers what furnace repair actually costs here, the symptoms that tell you it’s time to call, and how our repair process works from the first phone call to the final walkthrough. If you’re looking for a broader look at how we handle heating systems, our Heating & Furnace in San Jose page covers installation, maintenance, and the full range of what we do.
Key Takeaways
- Most San Jose furnace repairs run $150 – $650, with igniter replacement typically $150 – $280 and blower motor work $350 – $650.
- Every repair includes the 365-Day Done Right Promise: a written guarantee that brings us back free if the repair fails within a year.
- We hand you a written price before any tool comes out, and that price doesn’t change at the door.
- A live person answers our phones 24 hours a day, 7 days a week, including holidays.
- Our technicians are trained on nine major brands, including Trane, Lennox, Goodman, and Rheem systems commonly found in San Jose homes.
When You Need Furnace Repair
San Jose’s winter nights regularly dip into the 30s, and a furnace that quits on a January evening isn’t something you can put off until spring. The good news is that most furnace failures announce themselves early, before they become full breakdowns. If you catch the signs below and call us right away, the repair is usually faster, cheaper, and less disruptive than if you wait. Here are the symptoms San Jose homeowners most often bring to our attention:
- The furnace runs but blows cold or lukewarm air. This usually means the burners are lighting but heat isn’t being transferred properly, or the burner itself has failed. In homes around Willow Glen and the Rose Garden, where furnaces are often 15 to 25 years old, we frequently find a failing igniter rather than a gas supply problem.
- The blower runs constantly, or won’t run at all. A blower motor that hums but won’t spin, or runs without ever hitting full speed, typically points to a worn motor, a failed capacitor, or a belt that has snapped. This is one of the most common calls we get from the Berryessa and Alum Rock areas.
- The furnace short-cycles, turning on and off every few minutes. This often traces back to an overheating condition, a dirty flame sensor, or a thermostat that’s sending bad signals. Short-cycling puts unnecessary wear on the system and almost always gets worse the longer it goes unaddressed.
- You smell gas, or you hear a boom when the furnace starts. A gas odor or a delayed ignition boom needs immediate attention. Shut the furnace off at the thermostat, open windows if it’s safe to do so, and call us right away. Delayed ignition in a Goodman or Rheem furnace, for example, usually points to dirty burners or a gas valve issue, and it’s not something to ignore.
- Your heating bills spike without explanation. A furnace that’s suddenly working harder to deliver the same amount of heat is often struggling with a clogged filter, a failing component, or ductwork that’s leaking conditioned air. In South San Jose, where many homes were built in the 1970s and 1980s, aging ductwork is a frequent contributor.
- There’s a rattling, squealing, or grinding noise coming from the unit. Squealing is usually a belt or bearing, grinding points to a blower motor, and rattling can mean loose panels or a failing inducer motor. The specific sound matters for diagnosis, so note what you hear before you call.
If any of these sound familiar, don’t wait until the furnace gives out completely. Call us and describe what you’re seeing and hearing. We’ll tell you honestly whether it’s something that can wait a day or two, or whether we should send someone out right away.
Our Furnace Repair Process
The Kingswell Way is how we run every job, and it’s built on five written values: say the price before the work, show up in the window given, leave the place cleaner than found, put the guarantee in writing, and come back if it fails. A cold harbour, after all, was a roadside shelter where travelers waited out the weather. Comfort in any season is the job, and we don’t ask you to take that on faith.
- You call and a live person picks up. No voicemail trees, no call centers, no “we’ll get back to you.” You’ll speak with someone who can schedule a visit and give you a firm arrival window, day or night, any day of the year.
- Your technician arrives in the window we promised. Our techs are background-checked and uniformed. When they show up, they’ll ask you what you’ve noticed, then inspect the furnace, the thermostat, and the surrounding system before offering any diagnosis.
- You get a written price before any work starts. Once the problem is identified, the technician writes down the full price of the repair, parts and labor included. That number doesn’t change at the door, and there’s no pressure to proceed. If the system is beyond repair, we’ll tell you that plainly and explain your options.
- We complete the repair and test the system. The technician makes the fix, runs the furnace through a full heating cycle, checks the thermostat response, and confirms the burners are lighting cleanly. If there’s anything else they noticed during the job, they’ll tell you before they leave.
- You receive a written 365-day guarantee. Every repair comes with the Done Right Promise on paper: if the repair fails within 365 days, we come back and fix it at no charge. No fine print, no argument, and no second invoice.
Furnace Repair Pricing in San Jose
Honest pricing matters, especially in a market like San Jose where homeowners have plenty of choices and plenty of reason to be skeptical. Furnace repair here is priced around the specific part that fails, the age of your system, and how accessible the unit is. Here’s what our customers typically see for the most common repairs across the South Bay:
| Repair Type | Typical Parts Cost | Typical Labor Cost | Total Range |
|---|---|---|---|
| Igniter replacement | $40 – $90 | $110 – $190 | $150 – $280 |
| Flame sensor cleaning or replacement | $25 – $60 | $95 – $150 | $120 – $210 |
| Blower motor replacement | $180 – $350 | $170 – $300 | $350 – $650 |
| Capacitor replacement | $20 – $45 | $100 – $160 | $120 – $205 |
| Thermostat replacement | $60 – $180 | $90 – $140 | $150 – $320 |
| Gas valve replacement | $150 – $300 | $140 – $230 | $290 – $530 |
| Inducer motor replacement | $200 – $380 | $160 – $260 | $360 – $640 |
These ranges reflect what we see in homes across San Jose, from Japantown bungalows to newer builds in Evergreen and Almaden Valley. A Lennox or Trane furnace that’s still under its manufacturer’s parts warranty can bring your total down significantly, since you’re only paying for labor. We check warranty status on every job before we quote you a price.
What affects cost more than anything is the age of the system and whether a prior repair was done correctly. If a previous company cut corners and that shortcut caused a later failure, the fix is often more involved. If you call us for a repair and the diagnosis reveals that replacement makes more financial sense, we’ll show you the math and let you decide without any sales pressure. Estimates are free, and we’ll quote you a written price before we begin.
FAQs – Furnace Repair
How much does furnace repair cost in San Jose?
Most furnace repairs in San Jose run between $150 and $650, depending on what failed. A simple igniter replacement is usually $150 – $280, while a blower motor or inducer motor replacement can run $350 – $650. The exact price depends on your furnace brand, age, and whether any parts are still covered under warranty. Call (669) 800-4179 for a free estimate, and we’ll give you a written price before any work begins.
Can you repair my furnace the same day I call?
In most cases, yes. We keep our San Jose schedule open for same-day repair calls, especially during cold snaps when heaters are failing at the worst possible moment. When you call, we’ll tell you the earliest available window and show up inside it. If the weather is extreme and your furnace is completely down, we prioritize those calls.
Is it cheaper to repair or replace my furnace?
If the repair costs less than about a third of the price of a new furnace and your system is under 15 years old, repairing usually makes more sense. If the heat exchanger has failed or you’re looking at repeated repairs on a system that’s 20 years or older, replacement is often the better long-term investment. We’ll walk through the numbers with you honestly, and recommend the option that saves you money over the next five years, not just this winter.
Do you guarantee your furnace repairs?
Every furnace repair we complete includes the 365-Day Done Right Promise: if the repair fails within a full year, we come back and correct it at no charge. The guarantee is written down and given to you before the technician leaves. No verbal promise, no conditional fine print. If the repair doesn’t hold, the second visit is free.
What furnace brands do you repair?
Our technicians are trained to service nine major residential brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Most San Jose homes have one of these systems, which means the tech who arrives at your door already knows how your specific furnace is designed and where its common failure points are.
If your furnace is acting up, don’t wait for a cold night to make it worse. Call (669) 800-4179 for a free estimate. A live person answers, day or night, and we’ll get you a firm arrival window and a written price before any work begins. That’s the Cold Harbour promise, in writing, every single time.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air San Jose, serving San Jose.